Cheese Press for Cheese Making 16 in - Cheesemaking Kit with Wooden Cheese Press and 2 Cheese Molds 0.48 gal - 1.8 L Blue, Cheesecloth, Springs and measuring scale included

Working principle: Screw the cap nuts onto the guides. Install the bottom wooden plate 12 mm, put the mold with cheese curds on it, the piston, the second plate 12 mm, then screw on the metal washers, springs, washers, wooden plate 8 mm, washers, clamp the lambs and put on the upper cap nuts. To create the necessary pressure, attach a gauge to each spring and clamp the ram to the appropriate degree. If a lot of pressure is needed, gradually twist each ram to keep the plates horizontal. Attention, at the beginning of pressing, you need to clamp the lambs every half hour, because the piston in the mold lowers and the springs relax. Due to the fact that whey is released and the curd curd in the form decreases in size. You can use a drainage tray to drain the whey from under the mold. The measure has the following values: 34 lb, 80 lb, 110 lb, 170 lb and 210 lb. The pressure is calculated for the load of 1 form. If you put 2 forms, then accordingly the pressure must be divided by 2. Example. If you use 4 springs and 2 molds and clamp the to the degree of 34 lb each spring, then the pressure is distributed approximately on each mold: 34/2=17 lb. In the same way, the measure of two sides, you can use not four springs, but two, installing them diagonally. In this case, you will get less pressure on the form, respectively: 30 lb, 60 lb, 90 lb, 115 lb and 140 lb. All types of pressure were checked experimentally, using one form and clamping the springs to the appropriate indicators.✅ Cheese Making Press is designed for making cheese at home Dimensions: length 16 in width 8 in height guides 17 in ✅ Cheesemaking Kit include wooden cheese press, 2 cheese molds (0.48 gal) diameter 5.5 inch, height 4.3 inch, 2 Cheeseclothes, Springs and measuring scale ✅ Environmental Material Wooden cheese press: natural wood, plywood moisture resistant, 12 mm thick, oil-wax coated. Metal Guides- durable and not deformed ✅ Cheese Press and Cheese Molds use as diy cheese making kit ,tofu making kit ,cheddar cheese making kit ✅ Easy to ssemble, easy to remove water and hold shape

• ✅ Cheese Making Press is designed for making cheese at home Dimensions: length 16 in width 8 in height guides 17 in
• ✅ Cheesemaking Kit include wooden cheese press, 2 cheese molds (0.48 gal) diameter 5.5 inch, height 4.3 inch, 2 Cheeseclothes, Springs and measuring scale
• ✅ Environmental Material Wooden cheese press: natural wood, plywood moisture resistant, 12 mm thick, oil-wax coated. Metal Guides- durable and not deformed
• ✅ Cheese Press and Cheese Molds use as diy cheese making kit ,tofu making kit ,cheddar cheese making kit
• ✅ Easy to ssemble, easy to remove water and hold shape